•  
  • 机电EPC工程
  • 机电工程总包
  • 成功案例
  • 精英团队
  •  
  • 信息自动化
  • 信息自动化
  • 成功案例
  • 解决方案
  • 系统平台业绩
  • 自主研发
  •  
  • 智造信息化
  • 【ThingWorx介绍】
  • 【ThingWorx平台】
  • 【ThingWorx特点】
  • 【ThingWorx功能】
  • 【物联网对制造业的影响】
  • 【ThingWorx试用入口】
  • 智造信息化事业部简介
  • 竞博jbo下载ios产品
  • 产品价值
  • 产品框架
  • 系统介绍
  • 案例展示
  •  
  • 环保新能源
  • 环保新能源简介
  • 秸秆发电
  • 污泥处理
  • 危(医)废处置
  • 锅炉改造
  • 五环项目生物质锅炉供暖
  • 烧结机烟气循环利用节能技术
  • BB300氢气内燃发电机组
  • 连铸钢包浇钢优化控制系统
  • 滚筒法渣处理技术
  • 低温余热(废热)发电
  • 城市供水管网智能调度
  • MBR膜
  • MBR真空膜
  • MBR平板膜
  •  
  • 3D打印
  • 3D打印Solidscape 3Z产品介绍
  •  
  • 分支机构
  • 上海竞博jbo下载ios科技股份有限公司
  • 上海竞博jbo下载ios机电有限公司
  • 上海竞博jbo下载ios机电有限公司南京分公司
  • 武汉竞博jbo下载ios机电工程技术有限公司
  • 西安竞博jbo下载ios自动化科技有限公司
  • 上海竞博jbo下载ios科技股份有限公司成都办
  • 北京神州竞博jbo下载ios自动化技术有限公司
  • 1
  • BB300氢气内燃发电机组

    BB300氢气内燃发电机组

    BB300 Hydrogen Internal Combustion Engine Generating Set

    BB300 氢气内燃发电机组可由两台或两台以上机组组成电站,可在工厂、边远地区、资源开发基地等部门作为常用或备用电源。其中自动化机组可在工厂、医院、宾馆、贸易中心、计算中心、部队通讯设施、火车站、发电厂等部门作为应急或安保电源。

    Two and over BB300 hydrogen internal combustion engine generating set can be combined to a power station. It can be used as normal or stand by electric power supply in factories, remote area and resource development bases, etc. The automatic generating sets can be used as emergency or protective power in hospitals, hotels, trade centers, computer centers, military communication facilities, train stations and power stations.

     

     

     

    BB300 氢气内燃发电机组简介

    Brief introduction of BB300 hydrogen internal combustion engine generating set

     

    机组型号model

    额定功率Rated Power(kw)

    额定频率Rated frequency(Hz)

    额定电压Rated voltage(v)

    功率因数Power factor

    发动机调速方式engine govering method

    励磁方式Exciting method

    结构方式sturecture

    机组外形尺寸Overall dimension(mm)

    机组净重Net weight(kg)

    XXX

    300

    50

    400/230

    0.8

    Electrical

    无刷

    brushless

    分体式

    Seperated

    5300*1900*2170

    9000

     

    机组功能

    具有过电流、过电压、逆功、双超速、油压低、水温高等保护;机组电压、电流、功率、功率因数、蓄电池电压、转速、油压、水温等显示功能,带电动操作的空气开关(带失压脱机装置),附带15A附充电源。

    Function of generating set

    Has protections of when over current, over voltage, contrary power, double over speed, low oil pressure and high water temperature, etc., can display voltage, current, power, power factor, battery voltage, speed, oil pressure an water temperature, etc.; has air switch with electric operation(with lost pressure device), and has 15A battery.

    发电机组的配置

    发动机

    发电机

    控制屏:一体化控制屏通过减震装置安装在发电机上。

    并联功能:普通机组能够实现机组的稳定并联运行,并能进行不停电的负荷转移。机组具有转速、机油压力、冷却水温等超限报警功能。

    标准配置:气体机、发电机、控制屏、底座。

    保护功能:机组具有转速、机油压力、冷却水温等超限报警功能。

    Main components of the generating set

    Engine

    Generator

    Control panel: For integral  gen-set control panel is mounted on the generator base through shock absorbor.

    Parallel running: Synchronizing and parallel running are feasible for gensets. It is also available for loab to be transferred between gen-sets at normal running.

    Standard components: gas engine, alternator, control panel, common base.

    Protection function: there are over-limit alarms for speed, oil pressure, cooling water temperature and oil temperature.

    BB300 氢气内燃发电机组主要参数

    Technical parameters of BB300 hydrogen internal combustion engine generating set

     

    型号

    Model

    BB300

    额定功率

    Rated powerKw

    300

    额定频率

    Rated frequency(Hz)

    50

    额定电压

    Rated voltage(v)

    400/230

    额定转速

    Rate speedr/min

    1000

    相数

    Phase number

    三相四线

    Three phase four wire

    电压稳态调整率

    Static voltage adjustment rate

    ≤±2%

    电压瞬态调整率

    Voltage transient adjustment rate

    ≤±10%

    电压稳定时间

    Voltage stability time

    ≤1s

    耗热量

    Heat consumption

    ≤10800KJ/kW.h

    缸数

    Cylinder Numbers

    6

    缸径

    Bore(mm)

    190

    行程

    Stroke(mm)

    210

    总排量

    Total displacementL

    35.7

    启动方式

    Starting method

    电力(24V

    Electric(24V)

    冷却方式

    Cooling method

    闭式水冷

    Closed water cooling

    润滑方式

    Lubricating method

    压力或飞溅润滑

    pressure or splash lubricating

    绝缘等级

    Insulation grade

    H

    防护等级

    Levels of protection

    IP23

    燃料

    Fuel

    氢气

    hydrogen gas

    质保期

    The warranty period

    1年或运行1000小时

    1 years or 1000 hours of operation

    排气温度

    Exhaust temperature

    650

    外形尺寸

    Overall  dimensionsmm

    5300×1900×2170

    重量

    Weightkg

    9000

     

    负载电缆的推荐规格

    选用90×2mm2以上的多芯铜线

    蓄电池的推荐规格:

    选用200A.h以上,蓄电池连接线选用不小于75 mm2的多芯铜线。

     

    Recommend specification of loading cable

    Use 90×2mm2 above multi cores copper cable.

    Recommend specification of battery

    Use 200A.h above, battery connecting wire use not less than 75mm2 multi cores copper wire. 

    技术要求

    1.      本图为机组的最小尺寸,用户可根据需要进行放大。

    2.      燃气发电机组地基应建在硬土地面上,夯实后作200mm厚的混凝土。

    3.      用户在建造机房时,应在机组上方屋顶预埋起吊用工字钢,以备日后维修用。

    4.      机房应通风良好,地面应平整、防滑。

    5.      外接排气管的排除方向由用户自行,但内径不小于20mm,接出长度不宜过长,弯头不宜超过3个,表面应包隔热材料,且应在适当位置装设支撑,还应满足防火等安全要求。

    6.      机房大梁设置在机组中心线上或在二台机组3500mm距离的中心线上均可,避开排气管的位置。

     

    Technical Requirement

    1.      The figure above is the least dimension, customers can enlarge it according to their own situation.

    2.      The groundwork of gen sets should on land, tamped and make 1500mm thick concrete.

    3.      When building engine room, hoisting steel should be presser in the roof of the room for later repairing.

    4.      The engine room should have vent, and the floor should be flat and protected from sliding.

    5.      The exhaust direction should be decided by the customer, but the inside diameter should not less than 200mm, and the length should not be too long. Elbows should not more than 3, surface should pack with heat insulation material and should set supporter at suitable position. It also should meet need of safety requirements such as fire proofing, etc.

    6.      The girder of the gen sets house should be set on the central line of the gen sets, or on the central line of 3000mm distance between two gen sets, try to avoid the position of exhaust pipe.

     

    吊装要求:

    吊装发电机组时,必须整体水平起吊移动,严禁倾斜起吊或拖动发电机组。

    安装要求:

    安装发电机组时,必须在机组公共底盘与地基平面之间加垫减震胶垫,同时用薄铁片将减震胶垫与公共底盘之间找平;决不允许将发电机组带着包装底座加减震垫安装在地基上。

    使用要求:

    请仔细阅读发电机组随机资料,严格按照《气体内燃机机使用保养说明书》、《发电机组使用保养说明书》等资料中规定的操作使用规范使用机器,以免出现人为操作因素造成机器损坏。

     

    Hoisting requirement

    When generating set is hoisted, it should always be kept steadily, side hoisting, pulling and tilting hoisting are all strictly forbidden.

    Installation requirement

    The generating set should be lied on shock absorbor. The base should be leveling and horizontal. It is forbidden to place the generating set on its packing base.

    Operation requirement

    Carefully read the delivery documents, operate the machine according to the rules in Operation and Maintenance Manual of Gas Internal Combustion Engine, and the Operation and Maintenance Manual of Generating Set, so to avoid manly damage to the engine.

     



    版权所有: 上海竞博jbo下载ios机电有限公司  公司地址: 上海市普陀区中江路879号16栋1-4楼(200333) 沪ICP备11035548号 Tel: 021-52651993/4/5/6/7/8  Fax: 021-52651991